100Mbps Managed PoE Switch Need lots of PoE ports? The POEFEM24T2SFP features 24 PoE ports running at 10/100Mbps and 2 Gigabit uplink ports in paired fibre and Copper. This switch is designed for PoE applications such as Voice over IP phone deployment. The intelligent Layer 2 SNMP management features enable reliable transport of critical Voice over IP and Security data, even in congested network environments.
Product Features
- 24x Ports 10/100Mbps TP and 2x Ports Paired Gigabit TP/SFP
- Supports 24x ports 10/100M TP ports with Nway and auto MDIX function indication
- Supports hot swapping of SFP transceiver modules
- Non-blocking, store-and-forward and shared-memory switching technology
- Supports auto-negotiation for configuring speed and duplex settings
- Supports 802.3x flow control for full-duplex ports
- Supports collision-based and carrier-based backpressure for half-duplex ports
- 256-entry Multicast Address table
- Any port can be disabled, forced to a particular speed or set to NWay mode
- Per-port ingress/egress rate control with 64K/128K/256K (up to 100Mbps) resolution
- Supports Head of Line (HOL) blocking prevention
- Supports broadcast storm filtering
- 8K MAC addresses with automatic learning and aging
- Auto-aging with programmable inter-age time
- Supports 802.1p Class of Service with 4-level priority queuing
- Supports port mirroring function with 3 modes:
- (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)
- Supports port-based VLAN, 802.1Q tag-based VLAN with up to 256 entries
- Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
- Web-based management provides the ability to completely manage the switch from any web browser
- SNMP/Telnet interface delivers complete in-band management
- Supports IEEE 802.1d Spanning Tree Protocol
- Supports ingress port security mode for VLAN Tagged and Untagged frame process
- Supports SNMP MIB2 and RMON sampling with sampled packet error indication
- 24 ports of IEEE 802.3af compliant PoE PSE Ports
- Endpoint with 48VDC power through RJ-45 pins 1, 2, 3, 6
- Powered Device(PD) auto detection and classification
- Supports IEEE 802.1w Rapid Spanning Trees
- Supports IEEE 802.1x port-based network access control
- Supports IP Multicasting to implement IGMP Snooping function
- Supports 802.3ad port trunking with flexible load distribution and failover function
- PoE-PSE status and activity LED indicator
- Smart feature for PD on/off, class, feeding priority
Product Specification
- Standard ComplianceIEEE802.3/802.3ab / 802.3z / 802.3u / 802.3x/ 802.3af
- Transmission Mode1000Mbps support full duplex only
- 10/100/1000Mbps for TP
- 1000Mbps for Fibre
- Full Forwarding/Filtering Packet Rate1000Mbps: 1,488,000PPS
- 100Mbps: 148,800PPS
- 10Mbps: 14,880PPS
- MAC Address and Self-learning8K address table entries
- 256 VLAN table entries
- 256 IP multicast table entries
- Buffer MemoryEmbedded 256KB packet buffers and 128KB control memory
- Flow ControlIEEE802.3x compliant for full duplex
- Backpressure flow control for half duplex
- Cable and Maximum LengthTP: Cat. 5e UTP cable, up to 100m
- 1000Base-SX: Up to 220/275/500/550m, depending on Multi-Mode Fibre used
- 1000Base-LX SC: Single-Mode Fibre, up to10/30/50Km
- 1000Base-FX WDM SC S-M: Single Fibre, BiDi 20Km
- Diagnostic LEDSystem LED: Power, CPURUN, ACT (LEDSET), FDX (LEDSET), SPD (LEDSET)
- Per Port LED:
- 10/100M TP Port 1 to 24: LINK/ACT, FDX, SPD
- 1000M Fibre/TP Port 25,26: LINK/ACT, FDX, SPD
- Power RequirementVoltage: 100 - 240 V AC
- Frequency: 50 - 60 Hz
- Consumption: Max:
- 12W ( when no PD devices are connected)
- Max. 185W ( POE connections: 12ports @ 15.4W or 24ports @ 7.7W )
- Ambient Temperature
- Humidity
- Dimensions
- 44(H) x 442(W) x 209(D) mm
- Compliance
- FCC Part 15 Class A, CE Mark Approval & C-Tick
|